Skip to main content
⚠ OVER TEMP High Severity Wolf Warming Drawer

Wolf Warming Drawer OVER TEMP Error Code: What It Means & How to Fix It

Authoritative diagnosis guide — causes, step-by-step troubleshooting, and when to call a certified Wolf technician.

Certified Wolf Technicians
Same-Day Appointments
OEM Parts Only
30-Day Parts & Labor Warranty

Error Code Explained

What Does the Wolf OVER TEMP Error Code Mean?

A Wolf warming drawer overtemperature event occurs when the drawer cavity or control area exceeds the safe operating limit, triggering the thermal protection system. The drawer shuts down or disables the heating element as a protective measure. This can be caused by a stuck heating relay, blocked ventilation, or a failed temperature sensor reporting an incorrect low temperature.

Root Causes

Common Causes of the Wolf OVER TEMP Error Code

  • 1
    Stuck Closed Heating Relay
    The relay controlling the heating element has stuck in the closed position, keeping the element continuously energized and causing temperature to exceed safe limits.
  • 2
    Failed Temperature Sensor Reporting False Low
    The thermistor is reading a lower temperature than actual, causing the control to continue heating past the set point.
  • 3
    Blocked Drawer Ventilation
    Towels, dishware, or items have been placed in a way that blocks the drawer interior ventilation, concentrating heat to dangerous levels.

Step-by-Step Guide

How to Troubleshoot the OVER TEMP Error Code

⚠️

Safety First: Always disconnect the Warming Drawer from power before inspecting any internal components. Do not attempt electrical repairs. If in doubt, call a certified technician.

  1. 1
    Allow Full Cool-Down
    Power off the warming drawer and allow it to cool completely for 30 minutes before restoring power. Verify the drawer is not overloaded and has adequate clearance inside.

Professional Service

When to Call a Wolf Technician

⚠ Stop DIY if any of these apply

Overtemperature events that recur after cool-down require professional diagnosis of the heating relay and temperature sensor.

Estimated Repair Cost
$130 – $280
Exact quote before any work begins. No surprises.
📞 844-405-6853

FAQ

Frequently Asked Questions — Wolf OVER TEMP

  • The thermal protection system shuts the drawer down before damage or fire risk occurs. However, a stuck relay that causes repeated overtemperature events must be professionally repaired — do not continue using the drawer until the relay is replaced.

Book a Wolf Warming Drawer Repair Appointment

Wolf specialists available same-day. We'll call within 60 minutes to confirm your appointment.

  • Free Diagnosis Estimate
  • 30-Day Warranty
  • No Hidden Fees
  • Same-Day Service Available

Your information is secure. We never share or sell your data.

844-405-6853